Jeep Key Fob Battery Replacement

Whether you drive a Jeep Grand Cherokee or a Jeep Renegade, you’ll have a key fob that will assist you with entering and locking your vehicle in McKinney. When your key fob begins to malfunction or takes multiple clicks to lock or unlock your vehicle, then it’s time for a Jeep key fob battery replacement. Learn how to replace the battery in your Jeep key fob with Prosper Chrysler Dodge Jeep Ram, or contact us if you need a replacement key fob.

Signs Your Need a New Key Fob Battery

Over time, the battery in your Jeep key fob will need to be replaced to allow you to conveniently lock and unlock your car in Frisco. If you encounter any of the following problems, then it may be time for a Jeep key fob battery replacement:

• Unlocking and locking your Jeep takes multiple tries: If you find yourself pressing your key fob buttons repeatedly just to get the key fob to communicate with your vehicle, you should look for a replacement battery. This is often the first sign drivers notice when their battery begins to fail.
• Limited range: A fully operational Jeep key fob will work up to 50 feet away from your vehicle. This range decreases as the battery dies.

How to Change the Battery in a Jeep Key Fob

If it’s time to replace the battery in your Jeep key fob, the first thing you’ll need to do is acquire a CR2032 battery. These batteries are sold online and in Dallas stores for a cheap price. Once you have your new battery, follow these steps:

1. Open the Jeep key fob carefully with a flathead screwdriver or the removable metal. There should be a seam/slot close to the keyring mount.
2. Take apart the keyfob, opening up the circuit board and the keypad. Take note of how the old battery is laying in the case before removing it.
3. Swap out the battery with the new one, with the battery in the same position as the old one.
4. Reassemble the key fob, one piece at a time. Check your key fob to make sure it works. If it does not, re-open the key fob to make sure all the connections are making contact.

How to Reprogram Your Jeep Key Fob

After you change the battery in your Jeep key fob, you may need to reprogram the key fob to your vehicle. If so, follow these steps:

1. Get inside the car, close all the doors, and then put the keys to the “off” position on the ignition.
2. Open the driver’s door and press down the “lock” button.
3. Turn the key to the “on” position on the ignition and hold it for five seconds.
4. After that, you should be able to pull your keys out and have a programmed key fob.

Get Jeep Maintenance at Prosper Chrysler Dodge Jeep Ram

If you’re still having trouble with your Jeep key fob after you replace the battery, visit our Prosper service center to have it checked by our OEM certified technicians. We’ll help you replace the battery, program your key fob, or get you a key fob replacement if yours is damaged. Browse our service specials for savings on your next Jeep maintenance visit, and read our service and parts tips for more DIY car care!